Pete,
I've just gone through the Configuration settings in CDEX and found the
following in the CD Player tab:
I pressed the Space Bar to non select the "Native NI Scuzzy Library?" and
a
message popped up stating:
"Failed to find WNASPI32.DLL, use Native NI Scuzzy Library instead?"
I know I downlloaded the correct ASPI 32 system from the Adaptec website
and
copied the install command from the web to make sure I had the right one.
However, on checking the ASPI sub folder in the CDEX folder there is no
WNASPI32.DLL file in there, only a WNASPI64.DLL file which is no good as
my
computer is 32 bit.
I'll have to get back to the Adaptec website tomorrow to find out what has
happened.
I'll keep you posted.
Jim Wknow I
-----Original Message-----
From: jaws-uk-bounce@xxxxxxxxxxxxx
[mailto:jaws-uk-bounce@xxxxxxxxxxxxx]On Behalf Of Peter Hallam
Sent: 14 April 2008 18:21
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Re: Help with CDEX
Hi Jim,
The program does say jitter while it is ripping, but the track rips fine,
but in your case do you get an actual error message, in that case maybe
you
have a problem with the disc drive, please give us an idea of what kind of
error you get and whether or not the track rips successfully.
Regards,
Pete H.
----- Original Message -----
From: "Jim Williams" <jwbr33694@xxxxxxxxxxxxxxxx>
To: <jaws-uk@xxxxxxxxxxxxx>
Sent: Monday, April 14, 2008 5:17 PM
Subject: [jaws-uk] Help with CDEX
Hi List,
After getting nowhere with Goldwave I have turned to CDEX but with no
better
luck.
Each time I try to rip a track from a CD I get a "Jitter Error" message.
I
looked at the Help page and followed their advice and checked I had the
correct ASPI driver which I do. I tried changing the settings within the
CD
player list but with no success.
I have seen messages from other JAWS users who are familiar with CDEX so
I'm
hoping someone can come to my rescue.
Jim Williams
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
