Hello. My version was purchased by Enablemart which I am assuming works with NGT. The answer to all of your questions is yes and I have tried a repair.
Previous to J-Say I have used Dragon. The voice file I'm using is upgraded from Version 8, and to complicate matters further, I formerly used JawBone which undoubtedly also modified the MYCMDS file.
Other than this problem which I need to solve, I like the responsiveness of the product - echo is good, and the navigation is fantastic.
Gary----- Original Message ----- From: "Brian Hartgen" <Brian.Hartgen@xxxxxxxxxxxxxxxxxxxxx>
To: <j-say@xxxxxxxxxxxxx> Sent: Friday, January 05, 2007 2:04 PM Subject: [j-say list] Re: More on my DLL Error Sounds like you have some serious installation problems. If you purchased the software from NGT, they will assist you with this problem if you go to them for technical support. However, I would be asking: 1. Are you using jaws 7.10 build 500? 2. Are you using Dragon NaturallySpeaking Pro 9.10? 3. Are you using J-Say Pro 4.03? If all of the above is correct, ensure you have full admin rights on the machine and then undertake a repair of J-Say Pro. Brian Hartgen Technical Consultant T&T Consultancy Ltd Office suite 5, Imex Technology Park Trentham Lakes South Stoke-On-trent ST48LJ Phone: 08452 303015 Fax: 01782 646142 Web Site, www.tandt-consultancy.com NOTICE: The information contained in this email and any attachments is confidential and may be legally privileged. If you are not the intended recipient you are hereby notified that you must not use, disclose, distribute, copy, print or rely on this e-mail's content. If you are not the intended recipient, please notify the sender immediately and then delete the email and any attachments from your system. T&T Consultancy Ltd have made strenuous efforts to ensure that emails and any attachments generated by its staff are free from viruses. However, it cannot accept any responsibility for any viruses which are transmitted. We therefore recommend you scan all received e-mail messages. -----Original Message----- From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Wunder Sent: 05 January 2007 19:29 To: j-say Subject: [j-say list] More on my DLL Error I notice that the DLL error occurs everytime I say Close Program and refers to problems in the MYCOMMANDS script. There also seem to be commands I cannot use - Store Shortcut is one. Strangely I can use Store Address but when I say Address Gary Wunder, this is exactly what appears on-screen rather than the text I tried to associate with this command. Gary