[j-say list] Re: Microphone issues
- From: "Paula Waby" <pwaby@xxxxxxxxxxxx>
- To: <j-say@xxxxxxxxxxxxx>
- Date: Fri, 30 Nov 2007 09:04:21 +1300
Hi everyone
I don't understand then why the CDs that the person I am working with
all say J-Say Professional version 7. We could not find out how to check
the version on his actual machine and he lives four hours drive away so
I will have to wait until I go again to clarify things. Where do I go to
find out what version he had then? Strange that the CDs say version 7
though.
Cheers
Paula.
-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Pranav Lal
Sent: Friday, 30 November 2007 12:13 a.m.
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: Microphone issues
The latest version of J-say is 5.02.
-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Arne Gilbakken
Sent: Thursday, November 29, 2007 2:04 PM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: Microphone issues
Hello Paula,
are you shure the J-say is version 7? I read on TandT info page that
their current version is version 5?
Have you checked the mic adjustments in the controll panel?
Arne
-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx
[mailto:j-say-bounce@xxxxxxxxxxxxx]
On Behalf Of Paula Waby
Sent: 28. november 2007 23:37
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Microphone issues
Hi
I have recently started working with a person who has been set
up with Jaws, J-Say and Dragon about eighteen months ago. It worked for
a while but now we have some issues. The person is using Jaws 7.0, J-Say
pro version 7 and Dragon pro 8. He has XP with Service Pack 2. The
microphone does not seem to be feeding through information. It shows
visually that it is working once we added boost but the test said we
should hear something back through the speakers or headphones but this
does not happen. Any ideas on what might be wrong? Everything appears to
be plugged in correctly. Even when we managed to wake up the microphone
by using a mouse it did not respond to any voice commands. I am new at
seeing the system running so am not sure how to rectify the situation. I
know the person tried upgrading to Jaws 8 which was unsuccessful so they
went back to 7 and could this have caused an issue?
Cheers
Paula.
Paula Waby
Adaptive Communications Instructor
RNZFB
PO Box 2237
South Dunedin
New Zealand
DDI: 03-466-4250
Mobile: 021-2299-768
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.9/1158 - Release Date:
28.11.2007 21:11
Other related posts:
