[j-say list] Re: Dragon not accepting commands

Hi Ann,

Dragon premium is not supported by J-Say. If you do not need screen reader
support, then look at knowbrainer that does support dragon premium. For
J-Say, you do need dragon professional.


The thing with dragon professional is that it supports advanced scripting
commands which are programs. These are what J-Say uses to talk to Jaws and
control the computer.

Pranav

-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Ann Byrne
Sent: Saturday, February 18, 2012 6:45 AM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: Dragon not accepting commands

I'm using Office 2010, windows 7, Dragon 11.5 Premium.

I will try November.  At 04:55 PM 2/17/2012, you wrote:
>Ann:
>
>I tried "press control n"  in Outlook (from the Inbox view). Does 
>not work for me either.  The results box displays "press control 
>and" - so it's misunderstanding AND for N.
>
>I was able to say "press control November" and it worked perfectly - 
>opened up a new message just fine.
>
>I noticed that when in the Inbox View, the check mark on the Dragon 
>Bar for Full Text Control is GRAY, meaning that full control is not 
>active.  That is likely why "press control n" does not work.
>
>Once I have an email message open, and the Full Text Control check 
>is GREEN, then 'press control n' works, (at least sometimes).
>
>It could also be that Dragon is just having a difficult time 
>determining whether I am saying "n" or "and".
>
>What version of Word are you using (2010, 2007, 2003, etc)?  Also, 
>please remind me what version of Dragon you are using (I forgot if 
>you had mentioned it, and I've since deleted the original message).
>
>
>
>--Jim
>
>
>
>-----Original Message-----
>From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] 
>On Behalf Of Ann Byrne
>Sent: Friday, February 17, 2012 4:23 PM
>To: j-say@xxxxxxxxxxxxx
>Subject: [j-say list] Re: Dragon not accepting commands
>
>I'm working in Word, which I can open verbally, and Outlook, which I 
>can open.  But I can't "press control n" to begin a new message.
>At 07:56 AM 2/17/2012, you wrote:
> >I'm going to respectfully disagree with something Sue said (at least
> >partially).  While Dragon Premium does not allow FULL voice control of
> >the computer, there are some commands available while working in
> >documents.  Such as "move down one line", "move to end of document",
> >etc.  Also, the "press" commands should work with Premium.
> >
> >However, you do need to make sure you correctly say the command.
> >
> >Anne - when I re-read your original message, one of the examples you
> >gave that was being typed instead of processed was 'move down one'.
> >However, you did not tell it "what" to move down - as in 'move down one
> >???"
> >
> >Try using 'move down one line' or 'move down one paragraph'.
> >
> >Also, Anne, what program are you dictating into - Word, DragonPad,
> >Notepad, something in your web browser?
> >
> >It may be that Dragon doesn't support Full Text Control (previously
> >Select-and-Say) in your application.  If that's the case, many of the
> >basic commands (navigation, press, etc) won't work - regardless of
> >which mode you are in.
> >
> >
> >--Jim
> >
> >
> >________________________________________
> >From: j-say-bounce@xxxxxxxxxxxxx [j-say-bounce@xxxxxxxxxxxxx] on behalf
> >of Ann Byrne [annakb@xxxxxxxxxxxxx]
> >Sent: Friday, February 17, 2012 7:18 AM
> >To: j-say@xxxxxxxxxxxxx
> >Subject: [j-say list] Re: Dragon not accepting commands
> >
> >Oh, boy!  I think it's premium; will check when I get back to the work
> >computer.  Open and close work fine; just not 'press'.
> >
> >I did try going into command mode and no difference.  But perhaps this
> >one is solved.
> >
> >thanks, everyone, for the suggestions.
> >
> >ann
> >At 03:32 AM 2/17/2012, you wrote:
> > >A couple of comments here.  First, Ann, you say that your commands
> > >are beeing transcribed into your document.  This might seem obvious
> > >but, are you using Dragon Pro or Dragon Premium?  Premium does not
> > >provide for command and control by voice.  Second, if you want to
> > >close a program, try the command, close program.
> > >
> > >Hope that helps.
> > >
> > >Sue
> > >
> > >beting
> > >
> > >-----Original Message-----
> > >From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx]
> > >On Behalf Of Ann Byrne
> > >Sent: Thursday, February 16, 2012 7:22 PM
> > >To: j-say@xxxxxxxxxxxxx
> > >Subject: [j-say list] Re: Dragon not accepting commands
> > >
> > >It manages words very nicely.  To issue a keystroke command I say
'press'
> > >right?  Like "press alt f4"?
> > >   At 07:16 PM 2/16/2012, you wrote:
> > > >Is the microphone that you are using for dictation working?
> > > >
> > > >-----Original Message-----
> > > >From: j-say-bounce@xxxxxxxxxxxxx
> > > >[mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Judy Watford
> > > >Sent: Thursday, February 16, 2012 9:36 PM
> > > >To: j-say@xxxxxxxxxxxxx
> > > >Subject: [j-say list] Re: Dragon not accepting commands
> > > >
> > > >I am having the same problem with version 9. I did a j-say repair
> > > >as instructed and it will take some commands and ignore others.
> > > >
> > > >I have used this successfully in the past. I can't figure out what
> > > >is going on. I hope t and t will be able to improve the traing
> > > >portion. I was going to create a new profile, but the j-say key
> > > >hung up half way through the training material. I waited a safe
> > > >four second interval, but this feature has never worked well for
> > > >me. Will there be an improvement or has it stayed the same in
> > > >dragon 11.5. I am considering an upgrade, but I would like to 
> see if the problems have been fixed.
> > > >
> > > >I increased my accuracy setting and didn't get a long speech lag
> > > >and things were a little better.
> > > >Another problem I am now having is when I start to spell something
> > > >in the correction box, it just echos the first letter. Yes, I have
> > > >echo and spell turned on. Sometimes, it will silently finish the
> > > >word and sometimes it doesn't. I find this irritating because I
> > > >have to use the
> > >keyboard.
> > > >
> > > >Hope someone on list can help with this.
> > > >
> > > >Judy
> > > >
> > > >
> > > >-----Original Message-----
> > > >From: j-say-bounce@xxxxxxxxxxxxx
> > > >[mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Ann Byrne
> > > >Sent: Wednesday, February 15, 2012 8:48 PM
> > > >To: j-say@xxxxxxxxxxxxx
> > > >Subject: [j-say list] Dragon not accepting commands
> > > >
> > > >I'm new to speech input, and assume I have something set wrong 
> somewhere.
> > > >When I dictate, Dragon is happy.  When I say 'move down one',
> > > >Dragon types it into my document.  When I say "press control n"
> > > >it either ignores me or goes ting.  How do I explain that I am
> > > >commanding????
> > > >
> > > >Thanks,



Other related posts: