[j-say list] Re: Dragon not accepting commands
- From: "Judy Watford" <judyw@xxxxxxxxxxxxx>
- To: <j-say@xxxxxxxxxxxxx>
- Date: Fri, 17 Feb 2012 07:26:15 -0600
I have professional version 9 and the same problems are occuring
Regards,
Judy
-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Ann Byrne
Sent: Friday, February 17, 2012 7:18 AM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: Dragon not accepting commands
Oh, boy! I think it's premium; will check when I get back to the work
computer. Open and close work fine; just not 'press'.
I did try going into command mode and no difference. But perhaps this one
is solved.
thanks, everyone, for the suggestions.
ann
At 03:32 AM 2/17/2012, you wrote:
>A couple of comments here. First, Ann, you say that your commands are
>beeing transcribed into your document. This might seem obvious but,
>are you using Dragon Pro or Dragon Premium? Premium does not provide
>for command and control by voice. Second, if you want to close a
>program, try the command, close program.
>
>Hope that helps.
>
>Sue
>
>beting
>
>-----Original Message-----
>From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
>Behalf Of Ann Byrne
>Sent: Thursday, February 16, 2012 7:22 PM
>To: j-say@xxxxxxxxxxxxx
>Subject: [j-say list] Re: Dragon not accepting commands
>
>It manages words very nicely. To issue a keystroke command I say 'press'
>right? Like "press alt f4"?
> At 07:16 PM 2/16/2012, you wrote:
> >Is the microphone that you are using for dictation working?
> >
> >-----Original Message-----
> >From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx]
> >On Behalf Of Judy Watford
> >Sent: Thursday, February 16, 2012 9:36 PM
> >To: j-say@xxxxxxxxxxxxx
> >Subject: [j-say list] Re: Dragon not accepting commands
> >
> >I am having the same problem with version 9. I did a j-say repair as
> >instructed and it will take some commands and ignore others.
> >
> >I have used this successfully in the past. I can't figure out what is
> >going on. I hope t and t will be able to improve the traing portion.
> >I was going to create a new profile, but the j-say key hung up half
> >way through the training material. I waited a safe four second
> >interval, but this feature has never worked well for me. Will there
> >be an improvement or has it stayed the same in dragon 11.5. I am
> >considering an upgrade, but I would like to see if the problems have been
fixed.
> >
> >I increased my accuracy setting and didn't get a long speech lag and
> >things were a little better.
> >Another problem I am now having is when I start to spell something in
> >the correction box, it just echos the first letter. Yes, I have echo
> >and spell turned on. Sometimes, it will silently finish the word and
> >sometimes it doesn't. I find this irritating because I have to use
> >the
>keyboard.
> >
> >Hope someone on list can help with this.
> >
> >Judy
> >
> >
> >-----Original Message-----
> >From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx]
> >On Behalf Of Ann Byrne
> >Sent: Wednesday, February 15, 2012 8:48 PM
> >To: j-say@xxxxxxxxxxxxx
> >Subject: [j-say list] Dragon not accepting commands
> >
> >I'm new to speech input, and assume I have something set wrong somewhere.
> >When I dictate, Dragon is happy. When I say 'move down one', Dragon
> >types it into my document. When I say "press control n"
> >it either ignores me or goes ting. How do I explain that I am
> >commanding????
> >
> >Thanks,
Other related posts:
