jwb@xxxxxxxxxx wrote: > useful things at the command line .. blind typing: > > f12 .. followed by ctrl-g .. if it beeps.. you've got the command line > > F12 ctrl-g .. > con. mon.4 retn retn .. set up for svga style monitor. > > > F12 ctrl-g .. > wimpmode 31 retn retn .. 800*600 mode > > F12 ctrl-g .. > con.sync 1 (or 0 or auto) retn retn .. can be helpful .. > > > BTW if there is a second beep following the initial beep of bootup, then > you will almost certainly need an escape before you can use F12 > > Hope this is of help > > John > > Doug Webb wrote: > > In message <E1JVxEk-000KMp-Jg@xxxxxxxxxxxxxxxxxxxxxx> > > david@xxxxxxxxxxxxxxxxxxxxxx wrote: > > > > [snip] [snip] > > If the Iyonix is set up for DHCP then yes it will be waiting for the > > server. > > > > If this is the case just press the escape key and it should then boot > > as normal, though the network will not be set up of course. > > > > Doug > > > Will try this Doug then go to John's suggestions! Above Thanks both David --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support