[iyonix-support] Re: Video Card RAM

On Fri 31 Oct, charles wrote:
> 
> In article <c5a291f64f.acld75@xxxxxxxxxxxxx>,
>    george <george.greenfield@xxxxxxxxxxxxx> wrote:
> > In message <4ff684463fcharles@xxxxxxxxxxxxxxxxxxxxxxx>
> >           charles <charles@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
> 
> > [snip]
> > > 
> > > in SciCalc, if you click  on "Base" the input cycles through decimal,
> > > binary, octal & hexadecimal; the available buttons give the clue.  Go to
> > > hex, enter your number and switch  "base" to decimal - conversion done.
> > > 
> > > I worked this out in less time than it took me to type this email.
> 
> > You're obviously much more intelligent than me!
> 
> I'm a very slow typer.

It can be done but is rather awkward 


 * Memory 01000000-01FFFFFF
 * Memory 78000000-7FFFFFFF

The above shows two blocks of memory which you have to add but if you are
going to cut and paste them into !SciCalc [1] you need to add an & to all
entries!

i.e.
&01FFFFFF - &01000000
+
&7FFFFFFF - &78000000

= 128MB

[1] You may not be able to cut and paste on an Iyonix, I'm using RISC OS 6!


Chris Evans

-- 
CJE Micro's / 4D                'RISC OS Specialists'
Telephone: 01903 523222             Fax: 01903 523679
chris@xxxxxxxxxxxxxxx     http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex,     BN11 2EN
The most beautiful thing anyone can wear, is a smile!


---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: