[iyonix-support] Re: USB port access

 

> -----Original Message-----
> From: iyonix-support-bounce@xxxxxxxxxxxxx 
> [mailto:iyonix-support-bounce@xxxxxxxxxxxxx] On Behalf Of
Peter Dowson
> Sent: Monday, May 21, 2007 12:35 AM
> To: iyonix-support@xxxxxxxxxxxxx
> Subject: [iyonix-support] Re: USB port access
> 
> In article <a17313e64e.Bryan@xxxxxxxxxxxxxx>,
>    Bryan <bryanpage1@xxxxxxxxxxxxxx> wrote:
> > Hi,
> 
> > I'm using Ian Hamiltons !MFPxEpson application with my Epson
CX3200 
> > multifunction printer.  All is working well but I need to 
> share this 
> > printer with my wife's and another PC.
> 
> > I have purchased a Belkin 4 x 1 Peripheral Switch, which 
> the printer 
> > will be plugged into along with all accessing PC's.
> 
> > I installed the USB switching software onto a PC.
> 
> [Snip]
> 
> > Obviously I need a software application to give the Iyonix
focus on 
> > the printer and wondered if there was a documented way of
accessing 
> > the USB ports, pushing the equivalent of Alt-F11 or 
> Ctrl-F11 to them.
> 
> I used one of the USB ports on the KVM switch to plug the 
> Epson RX630 into and it works ok when switched over from one 
> to another repeatable all day.

Which make/model of switch are you using?

-Neil F.

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: