[iyonix-support] Re: USB hardware (?) problem.

On 11 May 2007 Dr Peter Young <pnyoung@xxxxxxxxxxxx> wrote:
> Presumably the rear socket has physically failed in some way. Now, I
> was told that connecting the non-working side socket would be
> reasonably easy, and I wonder if the same might apply to the rear
> socket too.

I presume you mean the front/side sockets (depending on case) which 
are connected by a lead which can become detached. The rear sockets 
are mounted on the card itself, so likely to be a soldering job.

> Can anyone give me any hints as to what I should do, and what I should
> be particularly careful not to do? Alternatively, is there anyone in
> Gloucestershire or thereabouts who would, for a reasonable fee, come
> and look at the machine for me? I'm sure this doesn't come within the
> remit of the technical help scheme of the ARM Club, which I've just
> rejoined.

Well I'm in Gloucester, give me a ring. My soldering skills are a bit 
rusty, so bear in mind you may end up requiring a new USB card from
Castle.

Cheers
---Dave

-- 
______________________________________________________________________

David J. Ruck   Phone: +44- (0)7974 108301   Email: druck@xxxxxxxxxxxx
______________________________________________________________________
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: