[iyonix-support] Re: Small issue with F12 command line and 5.14 (flashed)

On Fri 01 May, Bernard Veasey wrote:
> 
> In message <9b05935450.GrahameParish@xxxxxxxxxxxxxx>
>           Grahame Parish <grahame.parish@xxxxxxxxxxxxxxx> wrote:
> 
> > Hi,
> 
> > I've noticed a small problem when using F12 to exit to the command
> > line.  I get a row of pixels from the previous line each time I press
> > return, starting with a row from somewhere near the bottom of the icon
> > bar (appears to be slightly above the baseline of the text labels from
> > what I can tell), then a row from each new line of text for each press
> > of Return. It may be single line, or possibly two, it's hard to tell.
> 
> > I'm running 5.14 flashed to ROM, 1680 * 1050 16M resolution with
> > Geminus loaded.
> 
> I'm running 5.14 (soft), 1920 x 1200 16M resolution with Geminus 1.32
> and I don't get this problem.

Which graphics card have you each got?

I wonder because of the special things an Iyonix does before it gets to RISC
OS during booting, if the difference between in ROM & softloading may be the
reason for the difference!

Chris Evans

-- 
CJE Micro's / 4D                'RISC OS Specialists'
Telephone: 01903 523222             Fax: 01903 523679
chris@xxxxxxxxxxxxxxx     http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex,     BN11 2EN
The most beautiful thing anyone can wear, is a smile!


---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: