[iyonix-support] Re: Shutdown-Restart

In article <83b401f84e.pittdj+@xxxxxxxxxxxxxxx>, David Pitt
<pittdj@xxxxxxxxxxxxxxx> wrote:
> In message <4ef7e8e65driscos@xxxxxxxxxxxxx> Richard Ashbery
>   <riscos@xxxxxxxxxxxxx> wrote:

> > If you shutdown the machine by CTRL-Shift-F12 it offers one
> > button - "Restart". Stupidly I have inadvertently pressed the F12
> > key again by mistake instead of the 'Return' key. The machine
> > responds by displaying the normal single white command bar with
> > its CLI prompt at the bottom of the screen and then powers down.

> > When the machine is re-powered I get an error: Disc error 23 at
> > :4 C00 which presumably means the disc can't be found.

> > Recovery is possible by leaving the machine off for about 10
> > minutes and then re-powering. Have other users discovered this?
> > Is there a patch to stop this happening or do I have to pay more
> > attention to what my fingers are doing?

> The fingers are not the problem and neither is the OS, that error
> does not happen here. This may be a disc problem that clears as
> the drive cools down. The other possibility may be power supply,
> the Iyonix is a bit fussy as the power supply ages. Others will
> have more direct experience.

This is obviously something I'm going to have to monitor - this is a
newish machine. 

Regards

Richard

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: