[iyonix-support] Re: RO 5.14 SoftLoad Problem

On 12 Jun, Alex Cessford <alex@xxxxxxxxxxxxxxx> wrote:

>I don't know if you have received my email direct to ROOL and marked
>FAO yourself which I sent yesterday, but if so you can ignore that as
>thanks to Andrew at CJE Micros I am now able to use my Iyonix again.
>

[snip]

A large number of the emails last month  (and many in this thread) were
about getting the softload to load automatically which, as you've found
out, is dangerous if it's not working properly in the first place.

The CD release of the softload had a problem which caused some machines
(dependant on which video card is installed) to give the blank screen at
startup. Steve Revill reported this to the list on 27/04/09.

Your easiest route for a first step is to download the current softload
release from the ROOL site and run it by double-clicking on the Go514
obey file.

This means that it won't be run automatically on boot so it's not so
convenient, but also means that if you get problems then a reboot will
get you back to 5.13 with no hassle.

Only when you're happy that things are OK running this way should you
then go on to either run it automatically at boot or reflash your ROM.

Cheers,
Steve.


-- 
Steve Bradbury
Senior Structural Engineer
Alan Dick UK

The above message is for the intended recipient only and may contain 
confidential information and/or may be subject to legal privilege. If you are 
not the intended recipient, you are hereby notified that any dissemination, 
distribution, or copying of this message, or any attachment, is strictly 
prohibited. If it has reached you in error please inform us immediately by 
reply e-mail or telephone, reversing the charge if necessary. Please delete the 
message and the reply (if it contains the original message) thereafter. Thank 
you.

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: