[iyonix-support] Re: Printing with old kit

On Wed 28 Mar, Ian A Dunn wrote:
> 
> Doug Webb wrote:
> > In message <Marcel-1.53-0327092300-0b0pErr@xxxxxxxxxxxxxxxxxxxxxx>
> >           Chris Evans <chris@xxxxxxxxxxxxxxx> wrote:
> > 
> >> On Tue 27 Mar, Doug Webb wrote:
> >>> In message <4608091E.6010203@xxxxxxxxxxxx>
> >>>           Ian A Dunn <i.dunn2@xxxxxxxxxxxx> wrote:
> > 
> > [snip]
> > 
> >>> [snip]
> >>>
> >>> I think you need to use the BJC-7000 PDF which is in the supplied
> >>> !PrintDefs application.
> >> I was going to say that the bjc7000 or 7100 PDF that comes with Iyonix is
> >> the one to use but there isn't one!
> >>
> > 
> > [snip]
> > 
> > Ian,
> > 
> > This is what you need to do.
> > 
> > Download the BJC700 driver from the Castle site at:
> 
> snip
> 
> > Doug
> 
> 
> Thanks everyone
> 
> once again  I am reminded why the Risc Os community is well wroth 
> belonging to
> 
> the Castle drvier appears to be working well

IIRC the Castle driver doesn't support 'text' printing I believe ours does.
'text' as in directly from !Edit

Chris Evans

-- 
CJE Micro's / 4D                'RISC OS Specialists'
Telephone: 01903 523222             Fax: 01903 523679
chris@xxxxxxxxxxxxxxx     http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex,     BN11 2EN
The most beautiful thing anyone can wear, is a smile!


---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: