[iyonix-support] Re: Photodesk & dynamic areas again

On 25 Feb 2007 "David J. Ruck" <druck@xxxxxxxxxxxx> wrote:
> On 24 Feb 2007 Ian Nichols <ian.nichols@xxxxxxxxxxxxxxxx> wrote:
>> Today, I "upgraded" from Photodesk 3.05 to 3.06.. which won't run because
>> of the dynamic area problem discussed here recently.
>> 
>> So, I've put PhotodskDA in !Boot.Choices.Boot.Tasks and amended
>> Photodesk's !Run file as per the instructions and it still says "photodesk
>> cannot start due to its dynamic area being in high memory". Running
>> PhotodskDA again changes nothing, running it a 3rd time gets the message
>> "PhotodeskDA needs to be run earlier in the boot sequence".
> 
> It must be run once and once only. Try prefixing with a '!' so it is run
> earlier in the boot sequence.
> 
> I'm not happy with this line though:-
> 
>   Base% = Base% DIV (1024*1024)
>   
> Change it to:-
> 
>   Base = Base% >>> 20
>   
> This may then correctly diagnose the lower area of memory is not available
> when first run.

Something is up with that as it now fails for me under both 5.12 and 5.13
although !Photodesk runs indicating enough low DA space is available, and its
a problem with that BASIC file. Bear with me while I try to find the problem.

Cheers
---Dave

-- 
____________________________________________________________________________

  David J. Ruck    Phone: +44- (0)7974 108301    Email: druck@xxxxxxxxxxxx
____________________________________________________________________________
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: