[iyonix-support] Re: Panasonic DMC-FZ18 digital camera

In article <773233764f.tom@xxxxxxxxxxxxxxxxx>,
   Tom Hughes <tom@xxxxxxxxxx> wrote:
> In message <4f762b8c31charles@xxxxxxxxxxxxxxxxxxxxxxx>
>           charles <charles@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

> > In article <4f761dfd1bjohn.devine970@xxxxxxxxxxxx>,
> >    John Devine (Mail) <john.devine970@xxxxxxxxxxxx> wrote:
> > > Does anyone know if the memory card in the above camera can be
> > > read directly from the camera to an Iyonix or am I going to have
> > > to buy a card reader from The Man Who Stocks Everything?
> > 
> > The FZ20 is not recognised - just tried it.

> Did you make sure the USB mode on the camera was set to storage mode
> rather than directprint mode or whatever it's called?

Ah, no I didn't.  I've reset to "PC" mode and it works.


> I'm also assuming you were using a 2Gb or smaller card, or it might
> not appear to be recognised due to DOSFS limitations.

No, only 1GB.

> Tom

-- 
From KT24 - in "Leafy Surrey"

Using a RISC OS computer running v5.11 

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: