In message <47948AEC.8090408@xxxxxxxxxx> you wrote: > As far as LCDs are concerned, the BEST performance will ONLY be achieved > if optimal mdf settings are used. > > Here at Iyonix we have a tool we use that creates an MDF by reading the > settings from the monitor itself. All displays from us will come > therefore with appropriate MDFs. > > This capability is not so far built into the OS.. in other OS es this > does happen behind scenes (Plug - n - Pray operation) .. for the future??? Aha! Very interesting. I wonder what your magic tool says for the Video7 19" LDC (L19GM) which I have? I have an MDF written by Steve Revill, 17th Sep 2002 and adapted by John Mason, 12th Sep 2006. It is only very rarely that I find myself using anything other than the recommended 1280x1024 mode with the default monitor settings. Is there a standard protocol for the communications between computer and monitor, or does it vary from make to make? If standard, where can one read it? -- Gavin Wraith (gavin@xxxxxxxxxxxxxxx) Home page: http://www.wra1th.plus.com/ --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support