[iyonix-support] Re: My Iyonix still can not access the Internet!

Hello Chris Terran

Thanks for your advice.

> Niklaus, if you are using DHCP, just leave everything empty.
> It should all work automatically.
> 
> There should be *nothing* in the "Host Names" window except for your 
> "Host name" (just "iyonix" here). All the other fields should be 
> completely empty, and options unticked.
> 
> There should also be nothing in the "Routing" window, and no options 
> ticked.
> 
> All you should need to do is tick "via DHCP" in the interface 
> sub-dialogue. Just leave everything else blank and unticked.

When I configure the "Intel Pro/1000" to get the IP address "via DHCP",
then I get a "data abort at xxx" after the computer has booted!
Then I can even *not* access my router. The *ping command times out!

> If you are NOT using DHCP, your netmask looks a bit odd:
> 
> > 255.255.255.248
> 
> Are you sure about the last number? It's usually 0.

With zero as the last number it does *not* work too!

Greetings from Switzerland: Niklaus
-- 
Weiss Niklaus, Sagistrasse 20, CH-6300 Zug, Switzerland
Telephone +41 41 741 5778; Telefax +41 41 741 5776
Web: <http://www.weissniklaus.ch>
Email: <info@xxxxxxxxxxxxxxx> - ICQ UIN: 40440610

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: