[iyonix-support] Re: My Iyonix still can not access the Internet!

On Tue 15 Apr, John Ballance wrote:
> 
> Hi
> 
> Chris Evans wrote:
> > On Tue 15 Apr, Weiss Niklaus (Info) wrote:
> snip
> 
> >> After *dhcpe.ek0 I can access my router. It then replies the *ping command.
> >> I can access my router too with Netsurf and see its configuration site.
> >> However, I can *not* access any external websites! If I try this, then
> >> I get the error message: "No route to the host!", although the router's
> >> config site tells me, that the DNS servers are set correctly.
> >>
> >> What is still wrong here?
> > 
> > Have set it in Configure for DHCP?
> > or do you still have a manual address set?
> 
> please also ensure you DON'T have anything set in the gateway box in the 
> routing pane within internet setup - dhcp will set that itself
> 
> also what does inetstat -rn show - does it show the router ip address as 
> the default gateway?

I tried out two different configurations:

1] TCP/IP Protocol Suite disabled, then *dhcpe.ek0 only.
   This allows me to *ping to the router, that replies quickly.
   However, I can *not* access any external websites.
   I get the error message: "No route to the host."

2] TCP/IP Protocol Suite enabled, Inet Pro/1000 set as follows:
   Get IP address manually: 192.168.1.2 with netmask 255.255.255.248
   Gateway field empty, work as IP router disabled, execute RouteD disabled
   Hostname: Iyonix2, local domain: empty
   primary nameserver 212.40.0.10 secpmdary nameserver 212.40.5.50
   use namesever option ticked. nameserver resolver modul: Acorn
   then *dhcpe.ek0 in a task window
   After this I can *ping my router too, and it replies quickly.
   However, I can *not* access any external websites.
   I get the error message: "No route to the host."

With the first configuration I get the following infos in the TaskWindow:

*dhcpinfo
DHCP 0.21  (05 Aug 2004)

Interface     : ek0
State         : BOUND
IP address    : 192.168.1.2
DHCP server   : 192.168.1.1
Renew lease   @ Sat Apr 17 10:27:44 2004
Rebind lease  @ Sun Apr 18 13:27:44 2004
Lease expires @ Sun Apr 18 22:27:44 2004

*inetstat -rn
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use     Netif Expire
1.255.255.255      link#2             UHLW        1       14      ek0
127.0.0.1          127.0.0.1          UH          0        0      lo0
192.168.1/29       link#2             UC          0        0      ek0
192.168.1.1        0.a0.c5.3c.5c.7e   UHLW        0        3      ek0   1120
192.168.1.7        link#2             UHLW        1        6      ek0

With the second configuration I get the following infos in the TaskWindow:
*dhcpinfo
DHCP 0.21  (05 Aug 2004)

Interface     : ek0
State         : BOUND
IP address    : 192.168.1.2
DHCP server   : 192.168.1.1
Renew lease   @ Sat Apr 17 11:00:04 2004
Rebind lease  @ Sun Apr 18 14:00:04 2004
Lease expires @ Sun Apr 18 23:00:04 2004

*inetstat -rn
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use     Netif Expire
1.107.16.23        link#2             UHLW        1       12      ek0
1.255.255.255      link#2             UHLW        1        9      ek0
127.0.0.1          127.0.0.1          UH          0        0      lo0
192.168.1/29       link#2             UC          0        0      ek0
192.168.1.1        0.a0.c5.3c.5c.7e   UHLW        0        2      ek0   1186
192.168.1.7        link#2             UHLW        1       13      ek0

If I leave the "IP address" field empty, then I get the same result too!

Maybe the infos above enable you to help me further!

Greetings from Switzerland: Niklaus
-- 
Weiss Niklaus, Sagistrasse 20, CH-6300 Zug, Switzerland
Telephone +41 41 741 5778; Telefax +41 41 741 5776
Web: <http://www.weissniklaus.ch>
Email: <info@xxxxxxxxxxxxxxx> - ICQ UIN: 40440610

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: