[iyonix-support] Re: My Iyonix can not access the Internet!

On Wed 09 Apr, Peter Woodbine wrote:
> 
> On 09 Apr, Weiss Niklaus (Info) <info@xxxxxxxxxxxxxxx> wrote:
> > Hello there

> 
> > Motherboard IP address manually set to 192.168.1.2; routing through
> > 192.168.1.1, netmask 255.255.255.248 (and 255.255.255.0).
> 
> > With this configuration I at leat get *no* error message after the start.
> 
> > With both configurations and all possible variations I get only time out
> > messages, when I try to access the router or the internet with "NetSurf".
> 
> > Greetings: Niklaus
> 
> I have just gone through the process of setting up a router and my router
> uses 192.168.1.2 for the its USB connection.

Yes I wondered about that possibility but apparently his RiscPC works fine
on 192.168.1.2 !

Obviously in the long run he can't use .2 on the Iyonix and the RiscPC, but
at present he has no Hub or switch so can only connect one at a time.

> 192.168.1.1 is the ethernet connection.
> I used 192.168.1.4 for the Iyonix and 192.168..1.5 for the RiscPC and both
> work.
> 
> Pete
> 


Chris Evans

-- 
CJE Micro's / 4D                'RISC OS Specialists'
Telephone: 01903 523222             Fax: 01903 523679
chris@xxxxxxxxxxxxxxx     http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex,     BN11 2EN
The most beautiful thing anyone can wear, is a smile!


---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: