[iyonix-support] Re: My Iyonix can not access the Internet!

On 09 Apr, Weiss Niklaus (Info) <info@xxxxxxxxxxxxxxx> wrote:
> Hello there

> I bougth an Iyonix from the "4D" departement of "CJE Micros".
> It works fine, but can *not* access the Internet.
> Chris Evans told me, that this Iyonix is a developer system.

> The only thing, that does *not* work on my Iyonix, is the Internet access.
> I can configure the computer in all possible variants - I get time outs!
> The Iyonix works fine together with my RiscPC, and I can share the drives.

> My Iyonix has still RISC OS 5.11 and an old graphics card.
> For the Internet access I have an ADSL router "Zyxel P600 ME",
> that works fine together with my RiscPC and the ANT Internet Suite,
> but *not* with my Iyonix. The router can act as a DHCP server.
> Its own IP address is 192.168.1.1; for the other devices it starts with
> the address 192.168.1.2 and upwards. It is connected only to one machine.
> (I do *not* yet own any ethernet switches or hubs, so that I can connect
>  together only the Iyonix and the RiscPC or the Iyonix and the router or
>  the RiscPC and th router at the same time.)

> Firstly I tried out the following configuration:

> Motherboard IP address via DHCP, Routing / Gateway 192.168.1.1
> After the IP address seems to be found and set, I get the error message:
> "Data abort at xxx", after the IP address seems to be claimed.
> After this I can *not* get any access to my router or the internet.
>    
> I used the utility "where", that told me the following things:

> *where
> Address FC2F0DF0 is at offset 0000AC54 in module Internet

> *help internet
> ==> Helo for the keyword "Internet":
> The module is: Internet        5.50 (18 Feb 2005)

> *dhcpinfo
> DHCP 0.21  (05 Aug 2004)

> Interface     : ek0
> State         : INIT
> Retry         @ Mon Aug 10 10:39:53 2009

> *inetinfo
> Resource Usage:

> Sockets
>   Active 4

> Packet forwarding not in operation

> Secondly I tried out the configuration described below:

> Motherboard IP address manually set to 192.168.1.2; routing through
> 192.168.1.1, netmask 255.255.255.248 (and 255.255.255.0).

> With this configuration I at leat get *no* error message after the start.

> With both configurations and all possible variations I get only time out
> messages, when I try to access the router or the internet with "NetSurf".

> Greetings: Niklaus

I have just gone through the process of setting up a router and my router
uses 192.168.1.2 for the its USB connection.
192.168.1.1 is the ethernet connection.
I used 192.168.1.4 for the Iyonix and 192.168..1.5 for the RiscPC and both
work.

Pete

-- 
P.M.Woodbine

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: