[iyonix-support] Re: MDF for new monitor

On 16 Nov 2008 Richard Ashbery <riscos@xxxxxxxxxxxxx> wrote:

> In article <372092fe4f.Richard@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
>    Richard Mellish <RichardMellish@xxxxxxxxxxxxxx> wrote:
>> I've just acquired and installed a new large flat-screen monitor:
>> connected via a KSB switch to both my Iyonix and my Windows PC. The
>> PC immediately recognised it and gave me a choice of screen modes
>> up to the monitor's native resolution of 1900x1200, which display
>> perfectly without any need for adjustment, but I can't get a good
>> display with the Iyonix.

> The Iyonix is capable of driving a widescreen 1900 x 1200 and giving a
> sharp well defined image at this resolution but I believe you need the
> newer type of video graphics card (NVidia GeForce FX 5200).

All supplied graphics cards have been capable to 2048x1536, so there 
is no physical limitation on generating a large enough mode. Its just 
down to an issue of timing. Published timings or those extracted from 
a Windows driver need to be converted from msec or usec to pixel clock 
multiples.

Cheers
---Dave

-- 
______________________________________________________________________

David J. Ruck   Phone: +44- (0)7974 108301   Email: druck@xxxxxxxxxxxx
______________________________________________________________________
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: