[iyonix-support] Re: MDF for new monitor

In article <372092fe4f.Richard@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
   Richard Mellish <RichardMellish@xxxxxxxxxxxxxx> wrote:
> I've just acquired and installed a new large flat-screen monitor:
> connected via a KSB switch to both my Iyonix and my Windows PC. The
> PC immediately recognised it and gave me a choice of screen modes
> up to the monitor's native resolution of 1900x1200, which display
> perfectly without any need for adjustment, but I can't get a good
> display with the Iyonix.

The Iyonix is capable of driving a widescreen 1900 x 1200 and giving a
sharp well defined image at this resolution but I believe you need the
newer type of video graphics card (NVidia GeForce FX 5200).

There has been a thread recently discussing the amount of video
graphics card memory. Adian Lees reported that *GeminusInfo lists the
amount of RAM reported by the NVidia driver module. The last three
leftmost digits in the Screens.... range section indicate:

01F = 32MB
03F = 64MB
07F = 128MB.

However he then goes on to say this may or may not be the amount of
physical RAM present on the card - the only definitive way it seems is
to inspect the card - what a pain!

Regards

Richard
(RISC OS 5.13/Geminus 1.32)

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: