[iyonix-support] Re: MDF for new monitor

On 16 Nov 2008 Richard Mellish <RichardMellish@xxxxxxxxxxxxxx> wrote:
> The MDF from Paul's site that John sent me was almost right but left a
> few pixels missing off the right-hand edge. Changing sync_pol:1 to
> sync_pol:0 has cured that. Presumably the monitor is clever enough to
> cope with whatever sync polarities it receives, but the polarity is
> making a slight difference to the timing.

I wouldn't have thought about that, sync polarity is usually a works 
or doesn't work setting, but most of my experience with CRTs, it looks 
like there are a few more gotchas with LCD. Gald you got it sorted 
out.

Cheers
---Dave

-- 
______________________________________________________________________

David J. Ruck   Phone: +44- (0)7974 108301   Email: druck@xxxxxxxxxxxx
______________________________________________________________________
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: