[iyonix-support] Re: LAN printing

Dear Barry,
Tanks for your help, but... is does not work until now.
I tried your second option (RPFS):
I copied the RPFS directory into Boot:Choices.Boot.PreDesk
I set the connection to a file and the
entry reads:- RemotePrinterFS#Proto=Jetdirect;host=192.168.1.78:

(Where 192.168.1.78 is the IP address of my printer, PoScript2)


But my Iyohnix sais: path not present 
Will you please help me with the last/wright steps?
Herman Reintjes

In message <50396282f6barry@xxxxxxxxxxxxx> you wrote:

> In article <6f7c5f3950.tim@xxxxxxxxxxxxxxxxxx>, Tim Powys-Lybbe
> <tim@xxxxxxxxx> wrote:
> > In message of 9 Mar, Herman Reintjes <reintjeshhm@xxxxxxxxxxxx> wrote:
> 
> > > I understand, it is possible to use the Iyonix in network printing.
> > > But how to prepare the Iyonix and the (postscript) printer for this
> > > job. Can someone clarify this too please? Herman Reintjes.
> 
> > I have done network printing to a posscript printer for six years
> > from my Iyonix.  There are two protocols you can use:
> 
> >   1. LPR a commercial product which is purchasable from R-Comp.  I
> >      normally use this and it has full instructions and support.
> 
> >   2. RPFS by Stefan Bellon and is free and from:
> >      <http://www.sbellon.de/sw-modules.html> 
> >      I have used it successfully.  It has full instructions and you 
> >      can approach the author for support.
> 
> I use the 2nd option.
> In my postscript printer I have set the connection to a file and the
> entry reads:- RemotePrinterFS#Proto=Jetdirect;host=192.168.1.151:
> 
> Where 192.168.1.151 is the IP address of my printer.
> 
> Copy the RPFS directory into Boot:Choices.Boot.PreDesk
> 
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: