On 20 Dec 2006 root <root@xxxxxxxxxxxxxxxxxxxxxx> wrote: > >> If Escape is hit it will boot up but with Iconbar module unplugged > >> (there is now an RMreinit obey file in the boot sequence). > > > >That shouldn't be necessary, either something is unplugging it each time, or > >the CMOS memory is corrupt. > How do I 'uncorrupt' the CMOS memory? Delete power on? *RMReinit the module, double check with that its not in the list shown by *unplug Then reboot pressing escape so the boot sequence isn't run, if the module is now unplugged it means the CMOS memory is fault. If it isn't unplugged at this point, but it is after booting normally, you have a rogue file which is unplugging it in your boot sequence, find it and remove. Cheers ---Dave -- ____________________________________________________________________________ David J. Ruck Phone: +44- (0)7974 108301 Email: druck@xxxxxxxxxxxx ____________________________________________________________________________ --- To alter your preferences or leave the group, visit http://www.freelists.org/list/iyonix-support Other info via http://www.freelists.org/webpage/iyonix-support