On Mon 27 Oct, rickman@xxxxxxxxxxxxx wrote: > > John Ballance wrote: > > > I suspect this may be related to name servers .. if you use router > > assigned name servers it may be worth hard coding the name servers you > > use. If you have hard coded name servers, perhaps it may be worth > > checking that the server addresses you use are still valid, and work > > I have tried hard coding and DHCP name servers. It makes no > difference. Hard coding it to what? The dnserver address that your ISP told you or the IP address of the router? I'd recommend the later > NetSurf only works after it has been quit and then started again. > > Show inet* output is the same before NetSurf starts working and after > when it is working. > > <speculation> > The problem started about the time I installed a beta version of > NetSurf in late August. > > It is not the app itself (I have tried different versions) but may be > related to the system changes made when I installed it. > </speculation> What happens if you don't run NetSurf but try and and do an email/newsgroup transfer? Quitting and reloading the relevant software you are using. Chris Evans -- CJE Micro's / 4D 'RISC OS Specialists' Telephone: 01903 523222 Fax: 01903 523679 chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/ 78 Brighton Road, Worthing, West Sussex, BN11 2EN The most beautiful thing anyone can wear, is a smile! --- To alter your preferences or leave the group, visit http://www.freelists.org/list/iyonix-support Other info via http://www.freelists.org/webpage/iyonix-support