[iyonix-support] Re: Iyonix in the Cold

In message <7016B51F-6B12-4472-AC0D-FD3D060796DB@xxxxxxxxxxxx>
          Michael Talibard <michael@xxxxxxxxxxxx> wrote:

> I am more and more convinced that the oval start-up button on my  
> Iyonix is temperature-sensitive. The machine sits in a draught, and  
> after months of behaving properly, it started (in perfect  
> synchronicity with the recent wintry weather) a spell of consistent  
> failure, until I gave it its own gentle electric blow-heater, in  
> grateful response to which it now works again.
> ---
I fitted an FX5200 card last winter, and bad starts with pyjamas hugely
outnumbered good starts, now it is summer here in NZ, it very rarely
fails to start properly at all.
I found no cure with reset button usage, but found it easier to leave it
running with pyjamas for 10 mins and then try it again.
(enter fantastic ideas dept.) It would be good if I could replace the
noisy FX5200 fan with a heat exchanger and a nightstore system to re-use
the heat while the machine is off.

Cheers - Ron
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: