[iyonix-support] Re: Iyonix freezes - again!!!

In message <320baf874e.Andrew Pin@xxxxxxxxxxxxx>
          Andrew Pinder <Andrew.Pinder@xxxxxxxxxxxxx> wrote:

> In message <4e87ad480alists@xxxxxxxxxxxxx>
>           John Williams <lists@xxxxxxxxxxxxx> wrote:
> 
>> In article <2d05ab874e.Andrew Pin@xxxxxxxxxxxxx>,
>>    Andrew Pinder <Andrew.Pinder@xxxxxxxxxxxxx> wrote:
>> 
>>> The freezes tend to happen on the first disk access after returning to
>>> the machine and jumping out of the screen saver.
>> 
>> Is this an actual screensaver, or the monitor DPMS mode. If the former, try
>> changing to the latter.
>>
> The Slider screensaver accessible via Boot.  I will try changing this
> after firstly I have seen what Reporter logs and then after removing
> the second HD as suggested by Dave Ruck.
> 
Well I seem to have eliminated the problem for the minute by the 
simple expedient of turning the heating up!  The temperature and 
humidity were lurking around the 17 Celsius and low 60s% in RH.  I was 
also having problems with paper feeding in my printer.  Now it is 
around 20-21 Celsius and about 50% RH and everything is fine.

I had a quick play with Reporter (thanks Martin) but hadn't worked out 
how to set it up to log everything automatically to disc so hadn't 
gone to the trouble of taking the second HD out.

I also recall that in message <6da9b8824e.harriet@xxxxxxxxxx> on 8 Nov 
2006 at 20:18 Harriet Bazley <iyonix@xxxxxxxxxxxxxxxxxxxxxxxxxxx> 
wrote:

> Over the last week or so I have several times discovered that the Iyonix
> mouse was 'frozen' after boot-up was complete - I came back into the
> room to see a normal desktop, then found that the mouse pointer refused
> to move and the desktop failed to respond to an F12 keypress (or indeed
> any others).   So far, a reset has always fixed matters.
> 
> I wonder if this could be a temperature issue, since the temperature in
> here has not risen above 60F since the cold snap began (and has on
> occasion reached 54)?   Or is it related to the new ROM?

I can't see a spec for external temperature / humidity on 
www.iyonix.com  Is this kind of sensitivity typical?



-- 
Andrew Pinder
---
To alter your preferences or leave the group,
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: