[iyonix-support] Re: Iyonix 1 GB RAM upgrade. Which module ?

Xavier Tardy <xatardy@xxxxxxxxxx> wrote:
 
> I'd like to give 1 GB to my Iyonix. It seems to be not very expensive when
> I have a look on ebay. Is the Iyonix memory standard PC2100 266Mhz DIMM as
> for 'normal' PCs, are do I need to find a very specific module ? What I'm
> looking at has these specifications : Specifications:1GB 266MHZ 184PIN DDR
> Memory, No-ECC. Higher performance over mainstream PC100 or PC133 memory.
> Up to 2.1 GB/sec of peak bandwidth using PC2100 DIMMs (with DDR266 memory
> chips). JEDEC Standard. 184 pin DIMM, non-ECC. DIMM Lead pitch: 1.27 mm.
> 2.5 Volts. SSTL-2 I/O Interface. SPD Support. Support for Memory Chip
> Stacking.

When I built my Iyonix, I was advised that it could be picky about 1GB
memory modules so I bought mine directly from Castle. Mine is an 'Infineon
HYS64D12802GU-7-A with A3531427007 and is 1024MB, DDR, 266 CL2'. It is
organized in 128Mx64 SDRAM PC2100U-20330-B1.

I have rarely used > 512MB at one time but have never run out of memory. I
built my Iyonix at the end of October 2004 but the information above may
still be useful. It may be worth ensuring that whoever you buy from will
allow you to return it if the Iyonix does not get on with it, unless you
have another machine that still takes that type of memory.
-- 
Andy Wingate
<URL:http://www.sparse.net>
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: