[iyonix-support] Re: Impression problem

In message <9d9d59214f.druck@xxxxxxxxxxxxxxxx>
          "David J. Ruck" <druck@xxxxxxxxxxxx> wrote:

> On 12 Sep 2007 Kell Gatherer <kell@xxxxxxxxxxxxxxxxxxx> wrote:
>> Using Aemulor on an Iyonix (5.11):

>> Impression documents fail because graphics don't show. The error message is
>> "SWI &44597 not known".

>> This doesn't always happen, grr.

> The DitherExtend module isn't being located. Refer to the Aemulor
> documentation on how to include this module in the 26bit subsystem.

Not quite. The DitherExtend module should not be in the 26-bit 
subsystem - actually, that is one of the possible reasons for the 
problem. You should have a modern AWViewer installed (1.60 or higher, 
preferably version 2.10), which comes with 32-bit versions of all the 
modules. The emulated Impression uses those, except for AWRender, 
which needs to be emulated, so you need AWRender26. See the 
instructions in !AWViewer.!ReadMeMW for how to make the latest 
AWRender work with Impression under Aemulor - this requires some 
manual work.

This problem could be caused by first running other software under 
Aemulor that still has copies of the old 26-bit ArtWorks rendering 
modules.

Martin
-- 
---------------------------------------------------------------------
Martin Wuerthner           MW Software          lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: