[iyonix-support] Re: HannsG Monitor

In message <4f17704a18tricia@xxxxxxxxxxxxxxxxxxxxxx>
          Tricia Garner <tricia@xxxxxxxxxxxxxxxxxxxxxx> wrote:

> On 24 Aug, in article <00435b174f.jess@xxxxxxxxxxxxxxxxxx>,
>   Jess Hampshire <groups@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>> In message <4f16e88c8ftricia@xxxxxxxxxxxxxxxxxxxxxx>
>>           Tricia Garner <tricia@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> 
> [Snip]
> 
>> Unfortunately it's not the same as my Panel.
> 
>> You need a 1,680 x 1050 mode for the desktop. If you don't need other
>> modes, that's it.
> 
> That's the one. I can't imagine needing other modes. :-)

[snip - for games etc.]

> It's a 'budget' monitor but apparently packs a high(ish) spec for the
> money. I would want to utilise the full widescreen facility, or there would
> be no point in replacing the existing 19-inch monitor attached to the
> Iyonix. I appreciate it may not work - just have to try it, I guess.

It should work. If it works with a mac or a PC, it is just a case of 
producing the same signals.

If you don't want games (to work perfectly) then just adding the 1680 
x 1050 mode to an MDF suitable for a 1280 x 1024 should work.

-- 
Jess                   Iyonix
contact http://jess.itworkshop-nexus.net
mailto:groups@xxxxxxxxxxxxxxxxxxxxxxxxx
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: