[iyonix-support] Re: Flash drives not all registering

In message <4EEACBF931%andy-l@xxxxxxxxxx>
          Andy Wingate <andy-l@xxxxxxxxxx> wrote:

> In message <d4c8bbea4e.Alan.Adams@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
>           Alan Adams <alan.adams@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> 
>> The Iyonix Panther I'm getting to grips with has two flash drives in
>> the floppy assembly. They display in the icon bar as :0 and :1
>> 
>> I then plug in a Sweex f-slot drive, which presents itself on other
>> systems as 4 devices.
>> 
>> *devices
>> Device Type              Capacity    Vendor   Product
>> Revision
>> 0:0.0  Direct-access     Unknown     OEI-USB  CompactFlash      2.0
>> 0:0.1  Direct-access     Unknown     OEI-USB  SM/MS/SD          2.0
>> 0:1.0  Direct-access     Unknown     Generic  USB SD Reader    1.00
>> 0:1.1  Direct-access     Unknown     Generic  USB CF Reader    1.01
>> 0:1.2  Direct-access     2000 Mbytes Generic  USB SM Reader    1.02
>> 0:1.3  Direct-access     Unknown     Generic  USB MS Reader    1.03
> 
> As well as David Ruck's suggestion, I'd also suggest plugging the SM
> card into the slot in the floppy assembly instead. It appears that the
> built-in slots can do in its two ports what it takes four in your
> Sweex reader (i.e. your reader is duplicating already present
> functionality).

Unfortunately the SM slot is also the one which takes XD. I don't 
think the floppy slot takes XD, does it? The labelling says "CF, 
Microdrive, SM, MS, SD, MMC".

The Sweex reader is the one described as "30 in 1".

-- 
Alan Adams, from Northamptonshire
alan.adams@xxxxxxxxxxxxxxxxxxxxxxxxxxx
http://www.nckc.org.uk/

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: