[iyonix-support] Re: Failing Hard disk

In message <5b685c0450.alan@xxxxxxxxxxxx>
          Dr Alan Leighton <alan.leighton2@xxxxxxxxxxxx> wrote:

> Hi Folks
> 
> My Iyonix has two hard disks one named named HardDisk5 which is the 
> main disk and a back up HardDisk6. HD5 is getting a bit flaky with 
> errors every day. I need to switch to HD6 as my main disk and boot 
> from there until I replace the flaky disk.
> 
> Could someone tell be how to get the Iyonix to auto boot from my HD6 
> please and anything else I need to know and take action. All help will 
> be very welcome.,
> 
> Thanks in advance.
> 
> Alan
> 

*Status

Drive is usually 4

*configure drive 5

Hardisk6 should contain a !Boot application and it may be that
some pathes are not working properly.

In case of problems shift reset and set the drive back to old value by
"configure drive". You should test this first in every case before changing
the value.

You can create also a boot CD. In this case you have to change to filing
system too:

configure filesystem CDFS

Regards

Thomas Milius
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: