[iyonix-support] Re: DNS working but browser routing not!

In message <Marcel-1.53-1104173930-1cbpErr@xxxxxxxxxxxxxxxxxxxxxx>
 on 4 Nov 2009 CJE/NCS Sales <sales@xxxxxxxxxxxxxxx> wrote:

> On the Iyonix if DHCP is enabled then routing MUST be left blank.

> The only other setting is I believe the 'Hosts' section and setting
> 'try name server too' to unticked as works on our Iyonix netsurf reports an
> error on loading saying something abouts hosts not setup.

> Host name is set
> Local name is set when 'try name server too' is ticked
> The hosts file only has the standard loopback.

I use DHCP on my Iyonix, with a router supplied by RComp

The Internet configuration options are as follows:
Interfaces:  Motherboard ticked
Routing:     Gateway 10.0.0.2
             Act as IP router unticked
             Run RouteD unticked
             Routes file - no active commands
Host names   Host name and local domain are user specific
             Primary name server 10.0.0.2
             Secondary and Tertiary name servers both blank
             Try name server too is ticked
             Name resolver module Resolver (Acorn)
             Hosts file: This has entries for loopback (127.0.0.1) and 
the router (10.0.02) only

User options This contains several lines as follows:
sysctl -ew net.inet.tcp.recvspace=63360
Set Inet$MimeMappings InetDBase:MimeMap
Set Inet$ResolverDelay 5
Set Inet$ResolverRetries 3
SetEval Test$Eval 1
RMEnsure Resolver 0.55 SetEval Test$Eval 0
If Test$Eval THEN ResolverConfig
Unset Test$Eval


Regards

Andrew

-- 
Andrew Pinder
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: