[iyonix-support] Re: Connecting a new printer - help, please!

In message <F041D403-0313-4D55-BA0F-F200CBEBC4A7@xxxxxxx>
     Peter van der Vos <peterthuis@xxxxxxx> wrote:

> 
> Op 4-dec-2007, om 12:02 heeft J C Conner het volgende geschreven:
> 
>> I've been running a Brother HL-1250 off the Iyonix via a USB to
>> Parallel cable to a T-Switch box (sharing with a PC) and it has been
>> working fine.
>>
>> I want to exchange this for a Brother HL-5130 using the same
>> arrangement. The printer works fine with the PC but using PDFs
>> available (HL-1250, HL-5140, HL-5040) gives blank sheets on printing.
>>
>> Is there a PDF available? Any other ideas, please?
> 
> The HL-5130 seems to be a GDI printer. I don't think you can use it
> on RISC OS.
> 
> The HL-5140 works without problems.

Ah. Right. Thank you for that.

Back to the drawing board then.

Jonathan.

-- 
Internet access with Iyonix and RISC OS 5 :  <J.C. Conner>

Never attribute to malice that which may be explained by stupidity.
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: