In message <a487e06a4f.JCCArc@xxxxxxxxxxxxxxx> J C Conner <jcc@xxxxxxxxxxxxxxxxx> wrote: > Problem : the SCSI 0 and 1 icons don't always appear on the icon bar. > > Re-booting rarely cures it. Inserting a card into reader has been > known to bring up the icons but very, very rarely. > > Usually I have to power-down, take off the lid and unplug the reader > from the board and re-insert it.. This usually cures it but not > always. > > My BootSpool file indicates that nothing is wrong with the boot > sequence. > > Any ideas please? > > I'm running 5.13 (the latest, I assume?) > > Many thanks > > Jonathan. > Hi I have had this problem for years; USB kick certainly doesn't help. Re-arranging what is plugged into the various USB ports sometimes helpd. I recently bought a card reader from PC World called "Dazzle Hi-Speed USB 2.0" apparently made by Zio Corporation. Can't recall price but it was cheap. I have found that plugging that into one of the USB ports on the front brings up the icons every time and allows access to the various card types it takes including Flash which I wanted. Hope this helps Regards Tim -- --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support