[iyonix-support] Re: Belkin KVM (MacMini) switch2
- From: Gary Locock <gary@xxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Sun, 26 Nov 2006 23:20:32 +0000 (GMT)
In article <4569C1E1.3040205@xxxxxxxxxx>, John Ballance <jwb@xxxxxxxxxx>
wrote:
> Hi
> Gary Locock wrote:
> > Can anyone offer a suggestion as to why, when my Iyonix is booted through
> > the non-active connection, it is frozen when I return to the Iyo desktop?
> > Typically a data abort error is displayed; (today it was at &FC0502FC).
> >
> > If the Iyo is booted with its KVM* connections active, there is no
> > problem. If it is booted /without/ its KVM link active, it invariably
> > needs to be reset. It makes no difference whether or not the Mac is off,
> > on, or asleep.
> just a thought.. does it fail when you switch to the IYO if you have done
> a 'fail type' boot, but NOT run !USBKick?
I haven't tried this yet, but I have thought to use *where after the last two
non-frozen errored boot or "return to Iyo from Mac" events.
In both the cases so far (one of each), *Where has shown an error in the
OHCIDriver, address FC1BFB04 at offset 00003D2C. Two swallows don't make a
summer, but it is a coincidence if no more.
As a USB component, OHCIDriver (0.29 BTW) does sound like a likely suspect,
or an accomplice at least -?
[Snip]
> > RO5.11; USB-2; USBHID 0.45; Geminus 1.31. I always run !USBKick (1.08) at
> > boot, and on every boot since connecting the KVM it always registers 'Hub
> > device: Complete -Fail'. It does the same if run after booting is
> > complete.
> does it mis behave if any one of the above elements is NOT run? I only ask
> because both my main installations run through a KVM, and are often
> started with the kvm switched elsewhere, and I do not usually see an
> issue.. though I don't run usbhid, geminus, or usbkick in the normal run
> of events.
I'll have to do some booting trials to check these out; and indeed to see if
there are any non-OHCI errors.
[Snip]
> > What on earth can a
> > KVM do to crash an Iyonix on booting?
Gary
--
Gary Locock, Network Manager, Bablake Junior School
Coundon Road, Coventry CV1 4AU
School Website: http://www.bablakejs.co.uk
Private mail: g a r y (at) l o c o c k . c o . u k
---
To alter your preferences or leave the group,
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support
- Follow-Ups:
- [iyonix-support] Re: Belkin KVM (MacMini) switch2
- From: John Ballance
- References:
- [iyonix-support] Belkin KVM (MacMini) switch2
- From: Gary Locock
- [iyonix-support] Re: Belkin KVM (MacMini) switch2
- From: John Ballance
Other related posts:
- » [iyonix-support] Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- » [iyonix-support] Re: Belkin KVM (MacMini) switch2
- [iyonix-support] Re: Belkin KVM (MacMini) switch2
- From: John Ballance
- [iyonix-support] Belkin KVM (MacMini) switch2
- From: Gary Locock
- [iyonix-support] Re: Belkin KVM (MacMini) switch2
- From: John Ballance