[iyonix-support] Re: Belkin KVM (MacMini) switch2

Hi Gary,

Op 26-nov-2006, om 16:54 heeft Gary Locock het volgende geschreven:
Can anyone offer a suggestion as to why, when my Iyonix is booted through the 
non-active connection, it is frozen when I return to the Iyo desktop?
Typically a data abort error is displayed; (today it was at &FC0502FC).
If the Iyo is booted with its KVM* connections active, there is no problem. If it is booted /without/ its KVM link active, it invariably needs to be reset. It makes no difference whether or not the Mac is off, on, or asleep.
To compound the problem, if working on the Mac and I return to the Iyo, even if booted correctly, there is likely to be an application error window on display; depending on the app it may or may not have been fatal. (These 
latter errors seldom bring down the computer though..)
RO5.11; USB-2; USBHID 0.45; Geminus 1.31. I always run !USBKick (1.08) at boot, and on every boot since connecting the KVM it always registers 'Hub device: Complete -Fail'. It does the same if run after booting is complete.
I have almost the same configuration. A Mac Mini and an Iyonix 5.11 connected using a Belkin 2 port KVM switch (with build in cables). I have USB-2 and always run USB-HID (0.36, a bit old I see). Most of the time I run Aemulor Pro 2.32.
This configuration runs without trouble most of the time. Sometimes the Iyonix is frozen when I switch back (but I don't think the KVM is the problem) and sometimes the Mac mini is frozen. 

I never get an error when switching the KVM.

Good luck,

Peter
--
Peter van der Vos
peterthuis@xxxxxxx



---
To alter your preferences or leave the group, visit http://www.freelists.org/list/iyonix-support 
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: