[iyonix-support] Re: Audio In cycling volume

In message <7a027d7d4f.rogerarm@xxxxxxxxxxxxxxxxxxx>
          Roger Darlington <rogerarm@xxxxxxxxxx> wrote:

>> I've tried it again and it seems okay playing through with SoundCon
>> although if you try to skip through in segments by clicking on the
>> green progress bar it alternates between inaudible and audible, or
>> seems to.
> 
> So, all or nothing then?
> 
Yes, although I think that might be SoundCon.

>> 
>> The volume "cycling" seemed irregular and infrequent but made the
>> sample far too loud at intervals. Perhaps it was tape weaving as you
>> say but if I tried to multitask the first time I wonder if that would
>> have caused the effect.
> 
>  So not cyclic at all then, but irregular and infrequent.
> 
>>> Are the volume transitions sharp or smooth? If tape weave is the
>>> culprit, the volume transitions are probably smooth, akin to rather
>>> faster Radio Luxembourg fades.
>>> 
>> No they were definitely sharp.
> 
> If it is a sharp transition, then it is probably not tape weave.
> 
> With all this extra info: all or nothing, sharp transitions, and
> irregular and infrequent, I now suspect the connecting lead, from tape
> recorder to Iyonix Audio input.
> 
It's just a 3.5mm to 3.5mm lead I think.

Andrew


-- 

---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: