[iyonix-support] Re: 5.14 and ImageMaster/DPlngScan and a 5M JPEG
- From: Roger Foden <roger@xxxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Thu, 30 Apr 2009 16:40:59 +0100
In message <d9c7155450.dougjwebb@xxxxxxxxxxxxxx>
Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote:
> In message <mpro.kivxoj0001e3o08m9.tim@xxxxxxxxx>
> Tim Powys-Lybbe <tim@xxxxxxxxx> wrote:
>> I had soft-loaded 5.14 into my Iyonix which I had to use as VARPC would
>> not handle a 5M JPEG which DPlngScan converted to a Sprite of 41 M or
>> so, probably busting the 28M limit on VARPC.
>> Anyhow on the Iyonix I could load the JPEG file OK though somewhat
>> slowly, then tried to rotate it through 90%. This took well over an
>> hour, grinding along very slowly, but did complete OK. Then I tried to
>> save the file and ended up with the Iyonix completely crashing.
>> The Iyo restarted in 5.13, loaded the JPEG at the expected fast speed,
>> it then rotated it pretty close to greased-lightning and saved it with
>> no trouble at all.
>> My suspicion is that there is something unhappy between 5.14 and
>> DPlngScan.
> 5.14 flashed in to my Iyonix and I have successfully rotated a 2M jpeg
> image in DPlngScan in a fast time.
> I tried the same with a £M one that came out at 67MB for the sprite
> and it positively crawled.
> I then went to Geminus and turned off DMA acceleration and it rotated
> the ^&MB sprite a lot faster.
> Perhaps there is an issue with Geminus 1.33 and RISC OS 5.14?
> Doug
It doesn't seem to be just an issue with Geminus; I have soft-loaded
5.14 and on trying to rotate a 1,4MB jpeg (from an 8Mpixel camera) in
DPingScan I gave up after a minute (at 14%). DPingScan isn't very fast
anyway, but OS 5.14 seems to have upset it somewhat. There was also a
good deal of disc-thrashing, which I don't remember with OS 5.13.
I assume the soft-load will not be different from the flashed ROM in
any respects?
Regards
Roger
--
Roger Foden
---
To alter your preferences or leave the group,
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support
Other related posts: