[iyonix-support] Re: 5.11 Booting problem

In message <4f4f82a153richard@xxxxxxxxxxxxx>
          Richard Darby <richard@xxxxxxxxxxxxx> wrote:

>In article <16aa7a4f4f.david@xxxxxxxxxxxxxxxxxxxxxx>,
>   David W Mills <david@xxxxxxxxxxxxxxxxxxxxxx> wrote:
[snip  description of problems]
>
>> Question 1...Does the Iyinix need todetect a monitor before completing
>> the Boot sequence?
>
>
>I don't think so, but you can check this yourself by switching the monitor
>on at the same time.

Ah! Why didn't I think of that? Will do tomorrow a.m.
> 
>> or
>
>> Question 2,,,Is this behaviour possibly a factor of the KVM.
>
[snip]
>When this happens to my setup Iyo + windows PC with Belkin 2 port USB KVM
>I find both the LEDs on the keyboard and the optical mouse are dead and
>the !alarm clock is stopped.  

Mine are lit up even when the Iyonix is not running.

>This is an unpredictable and intermittent
>fault so difficult to pin down.  I have not seen the HD LED illuminated. 
>The only recovery is to press the reset button.

Interestingly Reset in my situation acts as if it's resetting from where the
process stopped as it's very much quicker than an "normal" reset!

David M
>
>Richard Darby.
>


-- 
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: