[isapros] Re: Fw: Re: Web Filter with HTTPS

Then how do you configure the HTTP filtering on web pub rules if the Web Filter is not bound to HTTPS?


t
----- Original Message ----- From: "Jim Harrison" <Jim@xxxxxxxxxxxx>
To: <isapros@xxxxxxxxxxxxx>
Sent: Wednesday, June 20, 2007 2:24 PM
Subject: [isapros] Re: Fw: Re: Web Filter with HTTPS


Sorta..
if it's a web pub rule, then the web proxy is already involved and no
"protocol binding" is required.
If it's a server pub rule, then ISA is effectively blind to the traffic
anyway.

-----Original Message-----
From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx]
On Behalf Of Thor (Hammer of God)
Sent: Wednesday, June 20, 2007 2:05 PM
To: isapros@xxxxxxxxxxxxx
Subject: [isapros] Fw: Re: Web Filter with HTTPS

OK, so you are saying that if I unbind the Web Filter from HTTPS, and
create
a pub rule for HTTPS, then the filter will still be used for the Pub
rule?

t


-----Original Message-----
From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx]
On Behalf Of Jim Harrison
Sent: Wednesday, June 20, 2007 5:43 PM
To: isapros@xxxxxxxxxxxxx
Subject: [isapros] Re: Web Filter with HTTPS

The web filter is the part that expects to watch the HTTP traffic as it
flows through ISA.
With the exception of web publishing, HTTPS traffic is effectively
invisible to ISA and therefore any policies enacted via the web filter
(think HTTP Filter, too) cannot be applied and ISA will default to "when
in doubt, trash it" mode.

-----Original Message-----
From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx]
On Behalf Of Thor (Hammer of God)
Sent: Wednesday, June 20, 2007 1:15 PM
To: isapros@xxxxxxxxxxxxx
Subject: [isapros] Web Filter with HTTPS

Just a sanity check here... why would all HTTPS traffic fail if the Web
Filter was bound to the HTTPS protocol?

t

All mail to and from this domain is GFI-scanned.




All mail to and from this domain is GFI-scanned.




Other related posts: