Hi Qua, I've got an article on this over at www.isaserver.org/shinder Check it out. HTH, Tom > -----Original Message----- > From: Qusai Ali AL Haddad [mailto:qusai@xxxxxxxxxxxxxx] > Sent: Friday, August 23, 2002 4:35 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] RE: ping > > http://www.ISAserver.org > > > thanx alot thomas > > i enable the ip routing in the packet filter > from where i will enable the default packet filter and secure NAT > sorry i am new in ISA > > regards > > Qua > ----- Original Message ----- > From: "Thomas W. Shinder" <tshinder@xxxxxxxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Saturday, August 24, 2002 12:30 AM > Subject: [isalist] RE: ping > > > http://www.ISAserver.org > > > Hi Qua, > > 1. Enable IP Routing > 2. Enable the default packet filters > 3. Make sure the LAT is configured correctly > 4. Use a SecureNAT client > > HTH, > Tom > > Thomas W Shinder > <http://www.isaserver.org/shinder> www.isaserver.org/shinder > > > -----Original Message----- > From: Qusai Ali AL Haddad [mailto:qusai@xxxxxxxxxxxxxx] > Sent: Friday, August 23, 2002 4:20 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] ping > > http://www.ISAserver.org > > dear all > > i cannot ping any site like " ping www.yahoo.com <http://www.yahoo.com> > " it will give me always > > request time out > > what shall i do > > > Qua > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > tshinder@xxxxxxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > qusai@xxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > tshinder@xxxxxxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub')