RE: nee d help

From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Wed, 5 Feb 2003 19:12:23 -0600
Hi Hanan,
 
OK great! Since there are no secondary connections, I assume that you
got this working for both SecureNAT and firewall clients.
 
Thanks!
Tom
 
 
Thomas W Shinder
www.isaserver.org/shinder <http://www.isaserver.org/shinder>  
ISA Server and Beyond: http://tinyurl.com/1jq1 <http://tinyurl.com/1jq1>

Configuring ISA Server: http://tinyurl.com/1llp
<http://tinyurl.com/1llp>  

        -----Original Message-----
        From: hanan [mailto:nouran@xxxxxxxxx] 
        Sent: Wednesday, February 05, 2003 1:34 PM
        To: [ISAserver.org Discussion List]
        Subject: [isalist] RE: nee d help
        
        
        http://www.ISAserver.org
        
        

        HI TOM

        All tcp ports are outbound

        And udp port is receive send

        No secondary ports

        I did it in my network and its work fine for chatting,webcam,and
voice

         

        -----Original Message-----
        From: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
        Sent: Wednesday, February 05, 2003 8:25 PM
        To: [ISAserver.org Discussion List]
        Subject: [isalist] RE: nee d help

         

        http://www.ISAserver.org

        Hi Hanan,

         

        Are those ports:

         

        Inbound?

        Outbound?

        Primary?

        Secondary?

         

        Thanks!

        Tom

         

         

        Thomas W Shinder

        www.isaserver.org/shinder <http://www.isaserver.org/shinder>  

        ISA Server and Beyond: http://tinyurl.com/1jq1
<http://tinyurl.com/1jq1> 

        Configuring ISA Server: http://tinyurl.com/1llp
<http://tinyurl.com/1llp> 

         

         

        -----Original Message-----
        From: hanan [mailto:nouran@xxxxxxxxx] 
        Sent: Wednesday, February 05, 2003 1:09 PM
        To: [ISAserver.org Discussion List]
        Subject: [isalist] RE: nee d help

        http://www.ISAserver.org

        Hi

        Create protocol definitions as the following:

        Port tcp 5050 

        Port tcp 5000  

        Port tcp 5001

        Port udp 5000 

        Port tcp 5100

         

        After create protocol rule to allow these protocols definition

        Restart fw service

         

        I HOPE THIS WILL HELP

        BEST REGARDS

         

        Hanan .Mawla

        MCSE,MCT,CCNP
RE: nee d help

Other related posts:
