With web publishing rules and destination sets.... -----Mensaje original----- De: Jet Lin [mailto:yao_shenglin@xxxxxxxxxxx] Enviado el: Domingo, 26 de Agosto de 2001 05:39 a.m. Asunto: Re: how to config two pop3 behind isa server Excuse me. I am curiously how to publish two or more web server that reside in internal but use only one external IP address? Please advise. ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, August 23, 2001 10:45 PM Subject: [isalist] Re: how to config two pop3 behind isa server > http://www.ISAserver.org > > > Unfortunately, no. For each published protocol, there must be a > corresponding external IP address. Only web publishing can use one external > IP for more than one publishing rule. > > Jim Harrison > MCP(2K), A+, Network+, PCG > > ----- Original Message ----- > From: "Enrique Arnut" <arnut@xxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Wednesday, August 22, 2001 3:49 PM > Subject: [isalist] how to config two pop3 behind isa server > > > http://www.ISAserver.org > > > Hi all, I have two exchange server 5.5. I config one exchange with mail > secure publishing wizard. Second exchange isn´t possible. ISA has only one > external ip address. > OWA running very good on two exchange servers across ISA. > Is possible two pop3 exchange behind isa with one external ip address? > I hope to be clear. Excuse my english, it´s not my native language. Thank > you. > > Enrique Arnut > Administrador de Sistemas > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: yao_shenglin@xxxxxxxxxxx > To unsubscribe send a blank email to >