Can a NBTSTAT successfully dump info from the NT4 box? ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, August 16, 2001 7:52 AM Subject: [isalist] Re: cant find dc > http://www.ISAserver.org > > > Interesting; using routable IP's for the internal net... > If the Cisco is routing properly, you should have no problem. what does > "ping 192.9.200.2" get you? > > Jim Harrison > MCP(2K), A+, Network+, PCG > > ----- Original Message ----- > From: "Adam Embrey" <aembrey@xxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Thursday, August 16, 2001 7:39 AM > Subject: [isalist] Re: cant find dc > > > http://www.ISAserver.org > > > Well the subnet that the nt4 machine might be a problem. We just aquired > the site during a merge. > > > Remote location NT4 255.255.255.0 > NT4 domain 192.9.200.2 PDC, Wins, Exchange. > 192.9.200.15 cisco 1720 > > Local W2k 255.255.255.0 > 192.168.100.3 Cisco 1720 > 192.168.100.15 Dc, Wins, DNS > > > > > -----Original Message----- > From: David Dellanno [mailto:david@xxxxxxxxxx] > Sent: Thursday, August 16, 2001 9:30 AM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: cant find dc > > > http://www.ISAserver.org > > > Hi Adam, > Could you layout for us your ip addresses configuration for the > NT4DC server and your W2KDC server and any routers inbetween them would > be > helpful. > > -----Original Message----- > From: Adam Embrey [mailto:aembrey@xxxxxxxxxxx] > Sent: Thursday, August 16, 2001 10:23 AM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: cant find dc > > > http://www.ISAserver.org > > > no its 0. and it cant resolve through broadcast because of the routing > and I have tried lmhosts. > > -----Original Message----- > From: Thor@xxxxxxxxxxxxxxx [mailto:Thor@xxxxxxxxxxxxxxx] > Sent: Thursday, August 16, 2001 8:40 AM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: cant find dc > > > http://www.ISAserver.org > > > Just to be pedantic, it could resolve it via broadcast or lmhosts too... > > Quick Q for Adam- you don't have RestrictAnonymous set to 2 on the win2k > box, do you? > > ----- Original Message ----- > From: "Jim Harrison" <jim@xxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Wednesday, August 15, 2001 2:08 PM > Subject: [isalist] Re: cant find dc > > > > http://www.ISAserver.org > > > > > > No it doesn't and that's part of the problem. If a Windows server > can't > > resolve the domain name through either DNS or WINS, it can't join the > > domain. > > > > Jim Harrison > > MCP(2K), A+, Network+, PCG > > > > ----- Original Message ----- > > From: "Adam Embrey" <aembrey@xxxxxxxxxxx> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > > Sent: Wednesday, August 15, 2001 11:52 AM > > Subject: [isalist] Re: cant find dc > > > > > > http://www.ISAserver.org > > > > > > I have never been able to ping domain name. unknown host. > > > > does an nt4 dc register anything special in dns? > > > > -----Original Message----- > > From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] > > Sent: Wednesday, August 15, 2001 11:30 AM > > To: [ISAserver.org Discussion List] > > Subject: [isalist] Re: cant find dc > > > > > > http://www.ISAserver.org > > > > > > You're trying to establish trust from a W2K domain to an NT4 domain? > > If so, > > 1. does the W2K DC have the correct WINS entries? > > 2. can you "ping domainname" successfully? If not, name > resolution > > isn't all you believe it is. > > 3. do you have DNS for the NT4 domain? W2K prefers DNS to WINS > for > > domain resolution. > > > > Jim Harrison > > MCP(2K), A+, Network+, PCG > > > > ----- Original Message ----- > > From: "Adam Embrey" <aembrey@xxxxxxxxxxx> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > > Sent: Wednesday, August 15, 2001 9:01 AM > > Subject: [isalist] cant find dc > > > > > > http://www.ISAserver.org > > > > > > a bit off topic. > > > > I have users from a remote location that have an nt4 domain, this > > location a have a 2000 domain. I have replicated wins and name > > resolution is working fine but when I try and set up trust or log in > to > > that domain from this one it says it cant find a domain controller. > any > > ideas? have tried lmhosts > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List as: > > jim@xxxxxxxxxxxx > > To unsubscribe send a blank email to > $subst('Email.Unsub') > > > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List as: > > aembrey@xxxxxxxxxxx > > To unsubscribe send a blank email to > $subst('Email.Unsub') > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List as: > > jim@xxxxxxxxxxxx > > To unsubscribe send a blank email to > $subst('Email.Unsub') > > > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List as: > thor@xxxxxxxxxxxxxxx > > To unsubscribe send a blank email to > $subst('Email.Unsub') > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > aembrey@xxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > david@xxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > aembrey@xxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: thor@xxxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub')