..and the ISA configuration is...? What rules are in place? Is packet Filtering enabled? Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://www.microsoft.com/isaserver http://isaserver.org/Jim_Harrison http://isatools.org Read the help, books and articles! ----- Original Message ----- From: "Colter Bowman" <colter@xxxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Monday, August 18, 2003 21:59 Subject: [isalist] Windows 2003 and ISA Server install with hotfix 255 http://www.ISAserver.org I have completed an ISA 2000 Server install with respective patches that are needed on a Windows 2003 server. I am getting no errors in my event viewer and 2003 is booting up smoothly. Usually, after an install on 2000 i am blocked on all out going and incoming ports. After this 2003 install all ports are open. I am testing this installation in a NAT environment as a stand alone webserver. I have a hardware device that is providing the port forwarding to the 2003 server and NAT. The packets aren't stopping at the 2003 server as i am able to connect to multiple ports. What steps should i take next to fix this issue and make ISA active as it is installed and looks fine but is not doing its job. Thanks in advance. Colter ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Other Internet Software Marketing Sites: Leading Network Software Directory: http://www.serverfiles.com No.1 Exchange Server Resource Site: http://www.msexchange.org Windows Security Resource Site: http://www.windowsecurity.com/ Network Security Library: http://www.secinf.net/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')