can you explain what is autodiscovery information ? i have not seen any information about that. where is there an article on this subject ? thanks gdumazet -----Message d'origine----- De : Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx] Envoyé : mercredi 29 août 2001 16:32 À : [ISAserver.org Discussion List] Objet : [isalist] RE: Web Publish BLOCKED - update http://www.ISAserver.org ISA uses port 80 for publishing autodiscovery information. If you are not using autodiscovery you can turn it off. Whack IIS on the ISA Server, of course (standard security rule!). HTH, Tom www.isaserver.org/shinder Thomas W Shinder, M.D., MCSE, MCT -----Original Message----- From: Greg Kavalec [mailto:Kavalec@xxxxxxxx] Sent: Wednesday, August 29, 2001 9:31 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Web Publish BLOCKED - update http://www.ISAserver.org Reports that ISA has a problem using :80 internally. -----Original Message----- From: Shayne Lebrun [mailto:slebrun@xxxxxxxxxxx] Sent: Wednesday, August 29, 2001 9:29 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Web Publish BLOCKED - update http://www.ISAserver.org Why are you bridging to a 'aribrarily high IP?' -----Original Message----- From: Greg Kavalec [mailto:Kavalec@xxxxxxxx] Sent: Wednesday, August 29, 2001 10:25 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Web Publish BLOCKED - update http://www.ISAserver.org OK I now have it down to getting: 64 - Host not available Internet Security and Acceleration Server ...when browsing to the external address (from outside). Is there a way to trace what ISA is doing? Greg Kavalec -----Original Message----- From: Greg Kavalec [mailto:Kavalec@xxxxxxxx] Sent: Tuesday, August 28, 2001 4:37 PM To: [ISAserver.org Discussion List] Subject: [isalist] Web Publish BLOCKED http://www.ISAserver.org I'm stuck. I've defined a destination set, one IP on the external interface. I've defined the action to bridge to an arbitrary high port # on an IP address on the internal LAN. I've set up the Web Publish rule to apply to Any Request. The test IIS server at the internal IP is set to the same port, and responds. Logs still say BLOCKED. What am I missing? Thanks Greg Kavalec ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: kavalec@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: slebrun@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: kavalec@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: gdumazet@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ______________________________________________________________________________ ifrance.com, l'email gratuit le plus complet de l'Internet ! vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP... http://www.ifrance.com/_reloc/email.emailif