RE: VPN

  • From: Thor@xxxxxxxxxxxxxxx
  • To: isalist@xxxxxxxxxxxxx
  • Date: Tue, 06 Nov 2001 07:46:34 -0800

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Maybe they mean cache-only mode, eh?


At 09:39 AM 11/6/2001 -0600, you wrote:
>http://www.ISAserver.org
>
>
>In the help file:
>
>*****************************
>To set up a local ISA Server virtual private network
>
>In the console tree of ISA Management, right-click Network
>configuration.
>Where?
>
>Internet Security and Acceleration Server
>Servers and Arrays
>Name
>Network configuration
>Click Set up Local ISA VPN Server.
>Follow the directions in the ISA Server VPN Configuration Wizard.
>Notes
>
>To open ISA Management, click Start, point to Programs, point to
>Microsoft ISA Server, and then click ISA Management.
>As part of the Local ISA VPN Setup Wizard, you will be prompted to type
>the domain or computer name of the remote server, on which the user
>account for the VPN connection will be created. If the computer is a
>domain controller, type its domain controller name. Otherwise, type the
>computer's NetBIOS name.
>You cannot set up a virtual private network if you installed ISA Server
>in cache mode.
>
>*****************************
>
>To set up a remote ISA Server virtual private network
>
>In the console tree of ISA Management, right-click Network
>configuration.
>Where?
>
>Internet Security and Acceleration Server
>Servers and Arrays
>Name
>Network configuration
>Click Set up Remote ISA VPN Server.
>In the ISA VPN wizard, follow the on-screen instructions.
>Notes
>
>To open ISA Management, click Start, point to Programs, point to
>Microsoft ISA Server, and then click ISA Management.
>The wizard creates the dial-on-demand interfaces that are required to
>initiate connections to a specific local VPN server, using the .vpc file
>generated by the Local ISA VPN Wizard.
>The wizard creates the dial-on-demand interfaces and configures the IP
>packet filters required to protect the connection and sets the static
>routes to forward traffic from the local network to hosts on the remote
>network via the tunnel.
>You cannot set up a virtual private network if you installed ISA Server
>in cache mode.
>
>********************************
>
>To set up ISA Server to accept client-side virtual private network
>requests
>
>In the console tree of ISA Management, right-click Network
>configuration.
>Where?
>
>Internet Security and Acceleration Server
>Servers and Arrays
>Name
>Network configuration
>Click Set up Clients to ISA Server VPN.
>In the ISA VPN Server wizard, follow the on-screen instructions.
>Notes
>
>To open ISA Management, click Start, point to Programs, point to
>Microsoft ISA Server, and then click ISA Management.
>You cannot set up a virtual private network if you installed ISA Server
>in cache mode.
>
>*******************************
>
>Look at the last line in each section.
>
>I figured that was the reason those options are not available when I
>right click Network Configuration
>
>Mike
>
>-----Original Message-----
>From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
>Sent: Tuesday, November 06, 2001 8:51 AM
>To: [ISAserver.org Discussion List]
>Subject: [isalist] RE: VPN
>
>
>http://www.ISAserver.org
>
>
>That statement doesn't make sense; where did you find that?
>
>Jim Harrison
>MCP(NT4, W2K), A+, Network+, PCG
>
>----- Original Message -----
>From: "Mike Carlson" <domitianx@xxxxxxxxxxxxx>
>To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
>Sent: Tuesday, November 06, 2001 05:21
>Subject: [isalist] RE: VPN
>
>
>http://www.ISAserver.org
>
>
>For some reason this message got rejected. Sending again.
>
>Mike
>
>-----Original Message-----
>From: Mike Carlson
>Sent: Monday, November 05, 2001 8:21 PM
>To: [ISAserver.org Discussion List]
>Subject: [isalist] VPN
>
>
>http://www.ISAserver.org
>
>
> From reading the doco, I noticed something about not be able to enable a
>VPN if you have ISA set to do caching.
>
>Can I disable caching and allow a VPN to work without reinstalling ISA?
>I really don't want to reinstall it.
>
>Is there a way around the caching issue.
>
>Thanks,
>
>********************
>Mike Carlson
>domitianx@xxxxxxxxxxxxx
>http://www.domitianx.com
>********************
>
>------------------------------------------------------
>You are currently subscribed to this ISAserver.org Discussion List as:
>domitianx@xxxxxxxxxxxxx To unsubscribe send a blank email to
>$subst('Email.Unsub')
>
>------------------------------------------------------
>You are currently subscribed to this ISAserver.org Discussion List as:
>jim@xxxxxxxxxxxx To unsubscribe send a blank email to
>$subst('Email.Unsub')
>
>
>
>------------------------------------------------------
>You are currently subscribed to this ISAserver.org Discussion List as:
>domitianx@xxxxxxxxxxxxx To unsubscribe send a blank email to
>$subst('Email.Unsub')
>
>------------------------------------------------------
>You are currently subscribed to this ISAserver.org Discussion List as: 
>thor@xxxxxxxxxxxxxxx
>To unsubscribe send a blank email to $subst('Email.Unsub')

-----BEGIN PGP SIGNATURE-----
Version: PGP 7.1

iQA/AwUBO+gF2ohsmyD15h5gEQKpJACcD6HBw1czDC8h7XtgSsFBMH00ussAoP/M
pYo0CxnBXnF/L/d61TInuzio
=hDrf
-----END PGP SIGNATURE-----


Other related posts: