Re: Upgrading server hardware

Thanks Jim

What if the hardware is physically different ?

I did try a restore, but was getting an error, I'm now resorting to backing
up the whole system and then restoring it to the new system, is this the
easiest and best way ?

Paul Crisp
Snr Network Support Analyst

Tel No : 020 7 827 5201
Fax No: 020 8 330 7051


-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 11 January 2002 15:05
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Upgrading server hardware


http://www.ISAserver.org


Watch out for drivers, particularly the networking ones.
If you use different NICs without deleting the old ones, W2K keeps them in
the registry and you'll get "IP already used" errors.

Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!

----- Original Message -----
From: "Paul Crisp" <PCrisp@xxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Friday, January 11, 2002 01:27
Subject: [isalist] Upgrading server hardware


http://www.ISAserver.org


I've currently got an installation of ISA Standard edition, working with no
problems at all, also VPN'ing ok as well on it.

I wish to upgrade the hardware, i know in order to restore the existing
installation the computer name needs to be the same, is there anything else
i have to look out for ?

Thanks in advance

Paul Crisp
Snr Network Support Analyst

Tel No : 020 7 827 5201
Fax No: 020 8 330 7051

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')



------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
pcrisp@xxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: